LINE ARRAY

M-F3A

  • Info
  • Secifidations
  • accessories
  • diagram
  • drownloads
  • picture

M-F3A is a compact and scale able active array system of small size and light weight. Each M-F3A contains 8 pieces of high-efficiency 2.8" full range speakers and 7 pieces of 1" direct radiate tweeter w/o horn, all vertically aligned to form a line array. Combining these components on the area of an A4 paper and weighing only 8 kg, each speaker box can produce an impressive 123 dB SPL continuously and 128 dB peak SPL. Built-in high class SMPS technology and two-channel class-D amplifiers, together with proprietary DSP- filtering and limiting, ensure a reliable and steady performance at all times. The M-F3A SUB is a V-shaped double 10" band pass subwoofer, also powered by a built-in 400 Watt class-D amplifier and equipped with switching mode power supply. Its compact and efficient design allows the subwoofer to perform great in all kinds of environments and its size guarantees very flexible subwoofer placement. All products have Powercon in and outputs as well as signal in-out for convenient daisy chain wiring to allow an individual adjustment of the system according to the application demands. In case a unit goes into protection mode, a built-in relais assures the continuous forwarding of power and signal. Great out-of-the box sound tuning, compact design, convenient wiring, easy scaleability and many other features of this system save a lot of space, time and money for speaker transportation and setup!

Small size, high SPL

The M-F3A features small size, same front size as an A4 paper and a weight of only 8kg. Still, one unit of this compact array delivers 123dB SPL max continuously (128dB peak). Advanced cooling and venting measures keep power compression at a minimum.

Plug and play

The M-F3A is designed to perfect sound for plug and play. Built in high class SMPS technology, two channel class-D amplifier together with proprietary DSP- filtering and limiting, relives you from head aches which settings should be used and how. Powercon inputs and outputs as well as signal in-out for convenient cabling. Should one MF-3 go into protection mode, signal and power still runs for all other connected units.

Line source

Each unit is already a line array in itself with very wide horizontal and precise controlled vertical dispersion.

Scalable

Because of its compact array design from the ground up, M-F3A can be scaled for a great variety of uses and venues. From single wall mounting use up to a 4.8m long array, delivering a continuous max SPL of 135dB and exceptional directivity.

    Application
  • Small and medium scale touring
  • Theater
  • Church
  • Multi-media rooms
Model: M-F3A
M-F3A TOP  
Type : 2.8" Bassreflex
Frequency Response (-6dB) : 120 Hz - 20 kHz
Power Output(RMS): 200 W + 200 W
Max. SPL (1m)  : 128 dB
Max. Qty of rigging (12: 1 Safety Factor, using s)))e original accessories): 18 pcs
Dispersion (H × V): 120° × 16°
Transducer MF : 8 × 2.8" Neodymium magnet, with cooling module 0.75" voice coil
Transducer HF : 7 × 1" Neodymium magnet, with cooling module 1" voice coil
Power Ampilifer Type : Class D amplifier, SMPS
Input Sensitivity : -4 dBV
Signal Processing : DSP, 48 kHz, 24 bits
Protection : Multiple limiter, short circuit, overheating
Controls : On / Off switch, main level, high shelf knob
Indicators : On, signal, limit, protect
Line Input / Output : Input XLR / Router-output XLR
Power Input / Output : Neutrik PowerCon
Cabinet / Paint : 12 mm plywood, black polyurea coating
Dimensions (W × H × D) : 210 × 317 × 359 mm
Weight: 8 kg
M-F3A SUB  
Type: 10" V construction, bandpass
Frequency Response (-6dB) : 40 Hz - 250 Hz
Power Handling (RMS): 400 W
Max. SPL (1m) : 129 dB
Transducer LF : 2 × 10" Ferrite, 2" voice coil
Power Ampilifer Type : Class D amplifier, SMPS
Input Sensitivity: -18 dBV
Signal Processing : DSP, 48 kHz, 24 bits
Protection : Multiple limiter, short circuit, overheating
Controls : On / Off switch, sub level, low pass frequency knob, 0°- 180° phase switch
Indicators : On, signal, limit, protect
Line Input / Output : input XLR / Router-output XLR
Power Input / Output : Neutrik PowerCon
Cabinet / Paint : 15 mm plywood, black polyurea paint
Dimensions (W × H × D) : 421 × 507 × 510 mm
Weight: 28 kg

M-F3A BF
M-F3A Bumper frame

M-F3A SFi
M-F3A Ground stack frame

M-F3A SUB FC
M-F3A SUB Flightcase(M-F3A SUB 2pcs)

M-F3A FC
M-F3A Flightcase(M-F3A 4pcs)


  • M-F3A Operation Options

  • M-F3A

  • M-F3A SUB

로그인

로그인폼

로그인 유지